We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
Ever increasing aging population is the driving factor for patient auto-monitoring systems. Moreover, the consistency, repeatability and low cost of these systems make them more popular. Sensor-studded monitoring systems are also versatile in this category due to their applications in both hospitals and homes. Diffused Silicon Pressure Sensor Module
It is simple to select a sensor if there is a clear understanding of the application and the parameters to be monitored. Implantable sensors are the most complicated sensors, followed by sensors utilized in catheters (through incision), sensors employed in body cavities, external sensors that get exposed to body fluids, and sensors for external applications.
Implantable sensors must have a small form factor, lightweight and need to be compatible with body mass and run at very little power. Most importantly, these sensors must not deteriorate over time and FDA approval is must as they are Class III medical devices. Moreover, they are in high in cost and a specialist’s help is required for their implantation.
Sensors that can operate without power are ideal, but their number is very few at this time. Piezoelectric polymer sensors are small and durable and do not require power, making them suitable for vibration detection applications such as pacemakers. The sensor is capable of differentiating between different physical activities such as walking and running. A miniature Piezo film vibration sensor with a length of 15/100 of an inch and a pacemaker housing it are depicted in Figures 1 and 2.
Figure 1. Miniature Piezo film sensor enlarged about 10x
It is possible to power implanted sensors by external sources such as an RF energy wand. The sensor implanted in the body will get power from the RF energy wand when it positioned close to the sensor. Now, the sensor can monitor patient conditions, send the information back to the wand through RF link, and get back to hibernation.
The criticality of prerequisites for sensors inserted through an incision, normally a catheter tip, is lesser than those of for implantables, but FDA approval is still compulsory. The surgical procedure to be performed decides the duration of the function of these sensors, which can be powered through external sources. Temporary temperature sensor catheter probe is shown in Figure 3. These thermistors can operate without external power.
Figure 3. Temporary temperature sensor catheter probe
Catheter ablation sensors are also examples for temporarily inserted sensors through incision. The catheter tip carries a RF energy source and a force load cell sensor. Besides sending data, the RF energy burns out dead tissue in the ablation process. The Microfused sensing technology from Measurement Specialties holds potential to provide a triaxial force-sensing system capable of measuring tissue contact forces in all three dimensions concurrently.
Silicon MEMS-based disposable pressure sensors are utilized in intrauterine pressure (IUP) sensors to take contraction pressure and frequency measurement during childbirth, as shown in Figure 4. It is possible to build additional features such as amnion fluid infusion and extraction into these sensors.
Oral and rectal probes are some of the examples for sensors utilized in body cavities. These small and rugged temperature sensors are coated with a soft material to provide protection to the inner layer of the organs of patients from sustaining damage caused by contact. Micro-Thermocouple sensors, as shown in Figure 5, are flexible fine gage thermocouples capable of providing rapid and accurate temperature measurements. Measurement Specialties’ Micro-Thermocouples are made of only bio-compatible materials, which make them suitable for medical applications.
There are many different disposable external sensors are available such as the disposable blood pressure sensor (DPS), as illustrated in Figure 6. Although these sensors are placed outside the body, they will be exposed to body fluids. These sensors are utilized in intensive care units and surgical procedures to provide continuous monitoring of the patient’s blood pressure. It is necessary to replace these sensors every 24 hours to prevent contamination. Another example is the sensors utilized in the inflation of angioplasty balloons.
Figure 6. Disposable blood pressure sensor
The following are the examples for medical devices that use sensors for external applications wherein the sensors are exposed to neither body fluids nor medication:
Figure 7. String pot position sensor
Figure 8. Infusion pump force load cell
Figure 10. Piezo film transmitter/receiver
Measurement Specialties is a global designer and manufacturer of sensors and sensor-based systems which measure pressure/force, position, vibration, temperature, humidity, and fluid properties. Measurement Specialties' products are used as embedded devices by original equipment manufacturers (OEMs) or as stand alone sensors for test and measurement to provide critical monitoring, feedback and control input.
This company is at the heart of many everyday products and provide a vital link to the physical world.
Measurement Specialties is an applications company and this company understands that embedded solutions often require customized designs. The portfolio for Measurement Specialties includes technologies capable of measuring most physical characteristics and allows them to design the right sensor for the application.
Physical property, electrical input/output and package configuration are all important considerations when developing products to meet their customers’ needs.
This company continues to expand its technology portfolio and geographic reach through the acquisition of strategically complementary companies. Measurement Specialties' operations in the US, Europe and China provide resources close to their customers. This global footprint allows this company to offer the lowest cost of ownership to OEMs.
Measurement Specialties value proposition is to understand the customer's sensing needs and develop a solution that meets their performance and cost objectives. At Measurement Specialties, Measurement Specialties are Sensing Your World.
This information has been sourced, reviewed and adapted from materials provided by Measurement Specialties.
For more information on this source, please visit Measurement Specialties.
Please use one of the following formats to cite this article in your essay, paper or report:
Measurement Specialties. (2019, May 24). Choosing the Right Sensors for BioMedical Applications. AZoSensors. Retrieved on October 11, 2023 from https://www.azosensors.com/article.aspx?ArticleID=176.
Measurement Specialties. "Choosing the Right Sensors for BioMedical Applications". AZoSensors. 11 October 2023. <https://www.azosensors.com/article.aspx?ArticleID=176>.
Measurement Specialties. "Choosing the Right Sensors for BioMedical Applications". AZoSensors. https://www.azosensors.com/article.aspx?ArticleID=176. (accessed October 11, 2023).
Measurement Specialties. 2019. Choosing the Right Sensors for BioMedical Applications. AZoSensors, viewed 11 October 2023, https://www.azosensors.com/article.aspx?ArticleID=176.
Do you have a review, update or anything you would like to add to this article?
In this interview, AZoSensors speaks with Paul Mark, Director of Marketing (Infrared), about the benefits of using MCT over microbolometers and microbolometer technology.
In this interview, Tekscan talks to Raul Oreste about pressure mapping, and how it can drastically improve battery and EV design and manufacturing.
In this interview, AZoSensors talks to Teledyne about line scan imaging, its advantages, emerging developments, and the future of the field.
The SHT4x DemoBoard range is designed to showcase the performance of Sensirion’s humidity and temperature sensors.
In this product profile, Environics outlines the advantages of using a photometer-controlled ozone generator and details some of the technology and solutions already available.
Sensata offers high-performance voice coil actuators (VCAs) utilizable across wide temperature ranges and harsh environments, with custom options, such as moving magnet designs.
AZoSensors.com - An AZoNetwork Site
Flush Ceramic Sensor Owned and operated by AZoNetwork, © 2000-2023